TL80 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL80

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

This successful universal workhorse can be equipped with an enormous selection of attachments. The Terex fingertip control allows for finely sensitive work to be performed with the hydraulically driven tools.
Such as multi-purpose buckets, sweepers, etc.  In addition, the Terex wheel loaders are characterized by articulated steering, oscillating rear axle, comfort cab with excellent view and two doors and the highly proven parallel kinematics. The entire machine is designed for driver comfort and efficient use.

  • Transverse-mounted diesel engine, high performance, minimized fuel consumption, low emissions
  • Hydrostatic travel drive, high traction power, infinitely variable speed control by driving automatics, optimum driving performance in all ground conditions, wear-free braking
  • Powerful hydraulics, high lifting and ripping forces
  • Excellent parallel kinematics for synchronized parallel operation of bucket and forklift attachment over the entire lifting height
  • Ease of operation, hydraulic pilot control, multi-function joystick for intuitive control
  • Wide range of proven working tools
  • Convincing serviceability, long maintenance intervals
Operating weight (SAE J 1197) 11,465 lbs (5,200 kg)
Tipping load, straight at full reach 8,576 lbs (3,890 kg)
Tipping load, articulated at full reach (ISO 14397-1) 7,562 lbs (3,430 kg)
Operating load, fully articulated 3,781 lbs (1,715 kg)
Total length, bucket on ground 16' 7" (5,060 mm)
Total width 6' 1" (1,850 mm)
Turning radius at outside bucket edge 13' 8" (4,160 mm)
Wheelbase 6' 11" (2,100 mm)
Total height (top of cab) 8' 8" (2,640 mm)
Manufacturer, model Deutz, D 2011 L04 W
Type 4-cylinder diesel engine,
EC phase III A, EPA Interim Tier 4
Combustion 4-stroke cycle, direct fuel injection
Displacement 222 in3 (3,620 cm3)
Net power rating at 2200 rpm (SAE J 1349) 59 hp (44 kW)
Cooling system Water
Nominal voltage 12 V
Battery 12 V / 100 Ah / 850 A
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed
ranges. Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear
axle via cardan shaft to front axle. Brake inching pedal.
2 speed ranges:
"Low" 0-4 mph (0-7 kph)
"High" 0-13 mph (0-20 kph)
4 speed ranges (high-speed version optional):
"Low" 0-4 / 0-11 mph (0-7 / 0-18 kph)
"High" 0-9 / 0-22 mph (0-14 / 0-36 kph)
Drawbar pull 9,395 lbs (4,175 daN)
Front: Rigid planetary fi nal drive axle, center-mount disc brake. Limited slip-type differential 45%.
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%. Axle weights, 661 lbs (300 kg), standard.
Angle of oscillation ±12°
Standard 405/70 R 18 SPT 9 Dunlop
Optional tires available, see options section
Service brake: Hydraulically actuated center-mounted disc brake,
acting on all 4 wheels via 4-wheel drive
Auxiliary brake: Hydrostatic drive provides dynamic braking
Parking brake: Mechanically actuated center-mounted disc brake on front axle
Articulated, 1 steering cylinder with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Fuel tank 20 gal (75 l)
Hydraulic system (incl. tank) 15 gal (55 l)
Max. pump capacity 17 gpm (64 l/min)
Max. working pressure 3,625 psi (250 bar)
Control unit: Proportional hydraulic valve with 3 control circuits and high-speed control for tilting.
Simultaneous, independent control of all movements. Single, four-way control lever (multi-function
lever) for tilt and lift cylinder with integrated travel direction selector switch and switch for additional
control circuit. Float position in control circuit “Lowering”, electro-hydraulically operated. Additional
control circuit including quick couplers and continuous operation function provided as standard.
Loader installation featuring true parallel linkage and integrated mechanical (optionnally hydraulic)
quick-attach system.
General-purpose bucket (SAE J 742) 1.18 yd3 (0.90 m3)
Lift capacity at ground level (SAE J 732) 10,800 lbs (48,000 N)
Breakout force at bucket edge (SAE J 732) 10,318 lbs (45,900 N)
Operating load (SAE J 1197) over the total lift and steering range 2,945 lbs (1,335* kg)
Operating load in transport position, above ground level, total steering range 5,512 lbs (2,500* kg)
Width of fork carrier 1240 mm
Length fork tines 4" x 1.8" (100 mm x 45 mm) 1100 mm
Stability factor 2
Load center from fork attachment point 22" (560 mm)
Rubber-mounted full-vision steel cab, ROPS (SAE J 1040) and FOPS** (SAE J 231) certified.
Cab featuring two doors, electric windshield intermittent wipers and washer (front and rear), tinted
panoramic safety glass, sliding window on left-hand side.
Operator’s seat is weight adjustable and includes hydraulic cushioning and lap belt.
Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front
and rear.
Air conditioning and radio pre-installation.
Steering wheel with height and tilt adjustment.
2 working fl oodlights, front.
Sound level values in compliance with EC-directives.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)