TL210 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL210

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Extreme thrust relative to bucket size makes the Terex® TL210 an ideal helper in agriculture and recycling. The best stability and great lifting power are provided by its transversely installed engine. The unique Terex® SP kinematics provide for powerful operation in all bucket positions. The TL210 is an extremely cost-effective wheel loader thanks to its hydrostatic drive, its exclusive cooling system with reversing blower and load-sensing hydraulics.

  • Excellent all-round visibility
  • Steel cab with perfectly designed operator's stand
  • Easy service accessibility for minimized downtime
  • Ergonomically designed controls for fatigue-free operation
  • Self-locking differentials provide optimum traction Loader frame with TSP kinematics
  • Fuel efficient Cummins turbocharged diesel engine
  • Fully automatic VarioPower transmission for smooth acceleration up to 25 mph (40 kph)


Operating weight (SAE J 1197) 28,660 lbs (13,000 kg)
Tipping load, straight at full reach, direct mounting / QAS 19,613 / 18,796 lbs (8,895 / 8,526 kg)
Tipping load, articulated at full reach, direct mounting / QAS 17,397 / 16,662 lbs (7,890 / 7,558 kg)
Operating Load, fully articulated 8,699 lbs (3,945 kg)
Total length, bucket on ground 23' 3" (7,095 mm)
Total width 8' 2" (2,500 mm)
Turning radius at outside bucket edge 19' 7" (5,970 mm)
Wheelbase 10' 2" (3,100 mm)
Total height (top of cab) 10' 8" (3,260 mm)
Manufacturer, model Cummins, QSB 6.7
Type 6-cylinder turbocharged diesel engine, COM III/EPA III
Combustion 4-stroke cycle, Common Rail injection
Displacement 409 in3 (6,700 cm3)
Net power rating at 2,200 rpm (SAE J 1349) 160 hp (119 kW)
Cooling system Water
Nominal voltage 24 V
Battery 2 x 12 V / 105 Ah / 760 A
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed
ranges. Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear
axle via cardan shaft to front axle. Brake inching pedal.
2 gears:
“Low” 0-3.7 mph (0-6 kph)
“High” 0-25 mph (0-40 kph)
Drawbar pull 23,625 lbs (10,500 daN)
Front: Rigid planetary fi nal drive axle. Limited slip-type differential 45%..
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%. Axle weights, 1,100 lbs (500 kg), standard.
Angle of oscillation ±12°
Standard 20.5 R25 VJT Bridgestone
Optional tires available, see options section
Service brake: Hydraulically actuated two-circuit power brake system. Oilimmersed
multi-disc brakes in both axles, acting on all 4 wheels
via 4-wheel drive.
Auxiliary brake: Hydrostatic drive provides dynamic braking.
Parking brake: Spring-loaded brake acting on the discs of the rear axle
Articulated, 2 steering cylinders with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Fuel tank 63 gal (240 l)
Hydraulic system (incl. tank) 35.6 gal (135 l)
Max. pump capacity 42.3 gpm (160 l/min)
Max. working pressure 3,915 psi (270 bar)
Control unit: Proportional LUDV hydraulic valve with 3 control circuits. Simultaneous, independent control
of all movements. Single, four-way control lever (multi-function lever) for 1 tilt and 2 lift cylinders
with integrated travel direction selector switch and switch for additional control circuit. Control circuits
“Lift / Lower”, “Dump / Tilt-back” pilot-operated. Float position in control circuit “Lowering”, electrohydraulically
operated. Electrically operated valve for additional control circuit provided as standard.
Loader frame with TSP-linkage, attachments directly mounted.
General-purpose bucket (SAE J 742) 2.75 yd3 (2.10 m3)
Lift capacity at ground level (SAE J 732) 27,740 lbf (123,400 N)
Breakout force at bucket edge (SAE J 732) 23,830 lbf (106,000 N)
Operating load (SAE J 1197), over the total lift and steering range 7,937 lbs (3,600 kg)*
Operating load in transport position, above ground level, total steering range 11,023 lbs (5,000 kg)*
Width of fork carrier 6' 3" (1,900 mm)
Length pallet forks 5.9" x 2.4" (150 mm x 60 mm) 3' 8" (1,200 mm)
Stability factor on level and solid ground 2
Load center from fork attachment point 22" (560 mm)
Rubber-mounted full-vision steel cab, ROPS (SAE J 1040) and FOPS (SAE J 231) certified.
Cab features two doors, level entry to cab and easy-to-clean floor.
Electric windshield intermittent wipers and washer (front and rear), tinted panoramic safety glass,
sliding window on left-hand side.
Operator’s seat MSG85 (standard version) with hydraulic cushioning and lap belt, weight-adjustable, in
compliance with ISO 7096 and ISO 6683.
Cab heating with 3-setting heater fan (choice fresh air/recirculating air) and windshield defroster
(front and rear).
Automatic climate control.
Steering wheel with height and tilt adjustment.
2 front and 2 rear working fl oodlights.
Sound level values in compliance with EC-directives.
*With rear axle weights