TL160 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL160

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The Terex TL160 already offers technology that is seldom found in its weight class today: servo brake, LUDV hydraulic system (load-independent flow distribution), hydrostatic drive and an exclusive cooling system with reversing blower. The powerful Terex SP kinematics and the transversely installed engine provide it with great power for productive use in agriculture and earth moving.

  • Transverse-mounted turbocharged diesel engine, high performance, minimized fuel consumption, low emissions
  • Hydrostatic travel drive, high traction power, infinitely variable speed control by driving automatics, optimum driving performance in all ground conditions, wear-free braking
  • Powerful hydraulics, high lifting and ripping forces
  • Excellent TSP kinematics for synchronized parallel operation of bucket and fork lift attachment over the entire lifting height
  • Ease of operation, hydraulic pilot control, multi-function joystick for intuitive control
  • Wide range of proven working tools
  • Convincing serviceability, long maintenance intervals
Operating weight (SAE J 1197) 21,385 lbs (9,700 kg)
Tipping load, straight at full reach 15,986 lbs (7,251 kg)
Tipping load, articulated at full reach 14,002 lbs (6,351 kg)
Operating Load, fully articulated 7,001 lbs (3,176 kg)
Total length, bucket on ground 21' 11" (6,690 mm)
Total width 7' 7" (2,300 mm)
Turning radius at outside bucket edge 17' 8" (5,395 mm)
Wheelbase 9' 1" (2,760 mm)
Total height (top of cab) 10' 0" (3,050 mm)
Manufacturer, model Perkins, 1104 D-44T
Type 4-cylinder turbocharged diesel engine,
EC phase III A, COM (2008)
Combustion 4-stroke cycle, direct fuel injection
Displacement 269 in3 (4,400 cm3)
Net power rating at 2,200 rpm (SAE J 1349) 100 hp (74.5 kW)
Cooling system Water
Nominal voltage 24 V
Battery 2 x 12 V / 74 Ah / 660 A
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed
ranges. Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear
axle via cardan shaft to front axle. Brake inching pedal.
2 speed ranges:
“Low” 0-3.7 mph (0-6 kph)
“High” 0-13 mph (0-20 kph)
4 speed ranges (high-speed version optional):
“Low” 0-3.7 / 0-13 mph (0-6 / 0-20 kph)
“High” 0-7.5 / 0-25 mph (0-12 / 0-40 kph)
Drawbar pull 15,300 lbs (6,800 daN)
Front: Rigid planetary fi nal drive axle. Limited slip-type differential 45%..
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%. Axle weights, 1,100 lbs (500 kg), standard.
Angle of oscillation ±12°
Standard 15.5 R 25 VUT Bridgestone
Optional tires available, see options section
Service brake: Hydraulically actuated two-circuit power brake system.
Oil-immersed multi-disc brakes in both axles,
acting on all 4 wheels via 4-wheel drive
Auxiliary brake: Hydrostatic drive provides dynamic braking
Parking brake: Spring-loaded brake acting on multi-disc brakes on both axle shafts
Articulated, 2 steering cylinders with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Fuel tank 37 gal (140 l)
Hydraulic system (incl. tank) 25 gal (93 l)
Max. pump capacity 26 gpm (99 l/min)
Max. working pressure 4,060 psi (280 bar)
Control unit: Proportional hydraulic valve with 3 control circuits. Simultaneous, independent control of
all movements. Single, four-way control lever (multi-function lever) for 1 tilt and 2 lift cylinders with
integrated travel direction selector switch and switch for additional control circuit. Float position in
control circuit “Lowering”, electro-hydraulically operated. Additional control circuit electrically operated
with preselection of fl ow rate and impulse/continous operation.
Loader frame with TSP-linkage, attachments directly mounted.
General-purpose bucket (SAE J 742) 2.1 yd3
(1.60 m3)
Lift capacity at ground level (SAE J 732) 19,221 lbf (85,500 N)
Breakout force at bucket edge (SAE J 732) 19,334 lbf (86,000 N)
Operating load (SAE J 1197), over the total lift and steering range 7,055 lbs (3,200 kg)*
Operating load in transport position, above ground level, total steering range 7,716 lbs (3,500 kg)*
Width of fork carrier 6' 3" (1,900 mm)
Length fork tines 5.5" x 2" (140 mm x 50 mm) 44" (1,120 mm)
Stability factor on level and solid ground 2
Load center from fork attachment point 22" (560 mm)
Rubber-mounted full-vision steel cab, ROPS (SAE J 1040) and FOPS** (SAE J 231) certified.
Cab features two doors, level entry to cab and easy-to-clean floor.
Electric windshield wipers and washer (front and rear), tinted panoramic safety glass and sliding
window on left-hand side.
Operator’s seat MSG85 (standard version) with hydraulic cushioning and lap belt, weight-adjustable, in
compliance with ISO 7096 and ISO 6683..
Cab heating with 3-setting heater fan (choice fresh air/recirculating air) and windshield
defroster (front and rear).
Automatic climate control.
Tilt adjustable steering wheel.
2 working floodlights, front.
Sound level values in compliance with EC-directives.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)