TC16 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TC16

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The 18-hp Terex® TC16 compact crawler excavator is compact and reliable. It is able to tackle a wide range of jobs, from trenching and drainage work to loading and site preparation. The adjustable Knickmatik® boom system on the TC16 excavator allows operators to work closely alongside walls or other existing infrastructure, as well as drive parallel to a trench or drain while working on it without turning the superstructure. In addition, this unit’s top-mounted neck cylinders are designed to provide additional clearance for the operator to load large, high-walled trucks and containers while protecting them from damage. End-position cushioning on this unit’s hydraulic cylinders reduces vibrations and allows operators to work comfortably.

This Terex excavator offers operators pilot-operated controls that provide both easy operation and changeable control patterns to best suit the operator’s preference. The adjustable track width on this unit, from 39 – 53 in, allows operators to access narrow or confined work sites and adds to the machine’s stability. The 53-in wide dozer blade is independently controlled from the track drive for uninterrupted operation. Weighing in at 3,800 lb, the TC16 model offers a dig depth of 7 ft 3 in and a maximum reach of 12 ft 10 in. It has a bucket capacity of 0.74 – 3.2 ft3.


  • Monobloc boom, with extended dipperstick 1,300mm (4'3")


  • Hydraulic hammer
  • Cutting unit
  • Auger
  • Quick-change adapter for hydraulic hammer
  • Bolt-on load hook for bucket rod


  • Fabric-covered operator's seat MSG 20), lap belt, adjustable driver's weight


  • Canopy with working floodlight


Nominal voltage 12 V
Battery 12 V / 71 Ah
Generator 12 V / 40 A
Starter 12 V / 1.7 kW
Single-stage hydrostatic travel drive with axial piston variable displacement motor and reduction gear,
fully enclosed. “Straight-Travel” function. Brake valve for downhill drive.
Travel speed, forward and reverse 0-2.4 kph
Gradeability max. 60 %
Drawbar pull 1160 daN
Manufacturer, model Mitsubishi, L3E
Type 3-cylinder diesel engine, EPA/Tier 4 Final (2008)
Combustion 4-stroke, swirl chamber injection
Displacement 952 cm3
Net power rating at 2200 rpm (ISO 9249) 13.1 kW (18 hp)
Torque 55 Nm at 2100 rpm
Cooling system Water
Independent of drive train, sensitive control via separate hand lever.
Width x height 1340 x 235 mm
Dozer cut below ground 160 mm
Dozer lift above ground 200 mm
Slope angle 25°
Independent, individual control of crawler chains, also counterwise. Sensitive control via hand levers
combined with foot pedals. Pedal console serving as foot rest.
Fuel tank 30 l
Hydraulic system (incl. tank 25 l) 35 l
Pump capacity 33 + 19 l/min
Working pressure 165 bar
Working hydraulics: Dual fi xed displacement pump with power switch. Load-independent fl ow division
(LUDV) for all work functions and travel drive. Simultaneous independent control of all movements.
Tank-immersed return fi lter with electric contamination indicator, full fl ow fi ltration. Hydraulic oil radiator
provided as standard. Boom, dipperstick and articulated cylinders with end-positioning damping on both
sides, bucket retract function with one-side end-position damping.
Open return provided as standard. All functions can be activated proportionally. Two servo-assisted joystick
controls for excavator operations. Shut-off of all functions when operator dismounts from machine.
Control circuit for work attachments (standard):
Diagram shows P/Q provided on couplers
Spacious, sound-insulated full-vision steel cab, FOPS** (acc. to ISO 3449) and TOPS (acc. to ISO 12117)
certifi ed. Two equally large doors. Safety glass windows, thermo windows tinted in green. Skylight thermo
window, bronze tinted. Panoramic rear window. Front window supported by pneumatic springs, lockable
for ventilation and slidable under cab roof. Windshield washer system. Storage compartment. Preparation
for radio installation. Left-hand outside rear-view mirror.
Cab heating with windshield defroster through coolant heat exchanger and 2-speed fan, ventilating mode
in summer.
Fabric-covered operator's seat FSP010 with lap belt.
Instrument panel on the right hand side of the operator's seat with visual & acoustic warning device,
hour-meter, instrument cluster with large fuel gauge.
Working fl ood lights Halogen H-3.
Noise emission ambience LWA 93 dB (A)
Noise emission cab LpA 78 dB (A)
Measured in dynamic measuring cycle acc. to EC-directive 2000/14/EC.
*with dipperstick 1300 mm (optional)
**FOPS-approved only with skylight guard (optional)
Transport weight (incl. bucket) 1650 kg
Operating weight acc. to ISO 6016 (incl. operator) 1725 kg
Total length (travel position) 2500 mm
Total length (trailer transport position) 3800 (3720*) mm
Total height (travel position) 2390 mm
Width (Crawlers retracted) 998 mm
Uppercarriage tailswing 1130 mm
Uppercarriage frontswing 1250 mm
Working envelope 180° / 360° 2370 / 2500 mm
Ground Clearance 170 mm
Bucket digging force (ISO 6015) 14,400 N
Stick digging force (ISO 6015) 9300 (8300*) N
Ground pressure (rubber crawlers) 0.27 daN/cm2
Maintenance-free crawler-type undercarriage. Idler suspension with hydraulic crawler track tensioning.
Mechanically retractable/extendable undercarriage provided as standard.
Range of adjustment, outside edge of crawler chains 990-1340 mm
Width rubber crawlers / steel crawlers 230 mm
Total length (sprocket - idler) 1130 mm
Total length (undercarriage) 1490 mm
Hydrostatic drive, also acts as wear-resistant brake. Internally toothed ring gear.
Swing speed 0-10 rpm
Lateral parallel adjustment of boom arrangement at full dig depth.
Angle of articulation / lateral adjustment left 60° / 370 mm
Angle of articulation / lateral adjustment right 60° / 510 mm
Quantity (Q) l/min
0 20 40 60 80 100 120 140 160 180
Pressure (P) bar