TL70S for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL70S

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The loader frame can be pivoted up to 90 degrees to both sides - a clear advantage for your work on narrow job sites. The driver can perform very precise and sensitive work with the excellent Terex fingertip control. The load-limit controlled, hydrostatic power transmission provides high efficiency at low fuel consumption. Four-wheel drive and continuously variable speed control additionally provide for optimal mobility.

Features

  • Transverse-mounted turbocharged diesel engine, high performance, minimized fuel consumption, low emissions
  • Hydrostatic travel drive, high traction power, infinitely variable speed control by driving automatics, optimum driving performance in all ground conditions, wear-free braking
  • Powerful hydraulics, high lifting and ripping forces
  • Excellent parallel kinematics for synchronized parallel operation of bucket and fork lift attachment over the entire lifting height
  • 180° working range of swing system (90° to the left and right respectively)
  • Wide range of proven working tools
  • Convincing serviceability, long maintenance interva

 

ENGINE
Manufacturer, model Deutz, D 2011 L04 W
Type 4-cylinder diesel engine, EC phase III A, EPA Interim Tier 4
Combustion 4-stroke cycle, direct fuel injection
Displacement 3620 cm3
Net power rating at 2200 rpm (ISO 9249) 44 kW (60 hp)
Cooling system Wate
ELECTRICAL SYSTEM
Nominal voltage 12 V
Lighting system in compliance with German and European standards
POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic
adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges.
Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via
cardan shaft to front axle. Brake inching pedal.
2 speed ranges:
“Low” 0-6 kph
“High” 0-20 kph
4 speed ranges (high-speed version optional):
“Low” 0-7 / 0-18 kph
“High” 0-14 / 0-36 kph
AXLES
Front: Rigid planetary fi nal drive axle, center-mounted disc brake. Limited slip-type differential 45%.
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%.
Angle of oscillation ±10°
TIRES
Standard 12.5-20 MPT 10 PR
BRAKES
Service brake: Hydraulically actuated center-mounted disc brake, acting on all 4
wheels via 4-wheel drive.
Auxiliary brake: Hydrostatic drive provides dynamic braking.
Parking brake: Mechanically actuated center-mounted disc brake on front axle
STEERING
Articulated, 1 steering cylinders with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
FLUID CAPACITIES
Fuel tank 75 l
Hydraulic system (incl. tank) 55 l
OPERATING DATA, STANDARD EQUIPMENT
Operating weight (ISO 6016) 5200 kg
Tipping load, straight at full reach (ISO 14397-1) 3660 kg
Tipping load, articulated at full reach (ISO 14397-1) 3230 kg
Total length, bucket on ground 5090 mm
Total width 1850 mm
Turning radius at outside bucket edge 4150 mm
Wheelbase 2100 mm
Total height (top of cab) 2660 mm
HYDRAULIC SYSTEM
Pump capacity 64 l/min
Working pressure 250 bar
Gear pump for swing hydraulics:
Max. pump capacity, swinging max. 28 l/min
Working pressure 250 bar
Control unit: Proportional hydraulic valve with 3 control circuits and high-speed control for tilting. Simultaneous,
independent control of all movements. Single, four-way control lever (multi-function lever) for
1 tilt and 2 lift cylinders with integrated travel direction selector switch and switch for additional control
circuit. Float position in control circuit “Lowering”, electro-hydraulically operated. Additional control
circuit including quick couplers and continuous operation function provided as standard.
Swing system: Hydraulic valve with 1 control circuit. 2 double-acting swing cylinders operated by switch
in multi-function handle. Integrated lift, lower and swing limitation mechanism preventing collision with
tires.
LOADER FRAME
Loader installation featuring true parallel linkage and integrated mechanical (optionally hydraulic)quickattach
system.
General-purpose bucket (ISO 7546) 0.70 m3
Lift capacity at ground level (ISO 14397-2) 45,100 N
Breakout force at bucket edge (ISO 14397-2) 48,300 N
Swing range with hydraulically operated ball bearing, 90° to the left and right respectively
FORK LIFT ATTACHMENT
Operating load over the total lift and steering range 2000 (2200*) kg
Operating load in transport position,
approx. 300 mm above ground level, total steering range
2500* kg
Width of fork carrier 1240 mm
Length pallet forks (100x45 mm) 1100 mm
Stability factor 1.25
Operating load determined on level ground = 80 % of tipping load, articulated
CAB
Rubber-mounted full-vision steel cab, ROPS (EN ISO 3471) and FOPS** (EN ISO 3449) certifi ed.
Cab featuring two doors, electric windshield intermittent wipers and washer (front and rear), tinted
panoramic safety glass, sliding window on left-hand side.
Driver's seat MSG 85 (basic) with hydraulic cushioning and lap belt, weight-adjustable, in compliance
with ISO 7096 and ISO 6683.
Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front
and rear.
Air conditioning and radio pre-installation.
Tilt adjustable steering wheel.
2 working fl oodlights, front.
Sound level values in compliance with EC-directives.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)