TL65 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL65

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The entry model in the compact class: Achieves an enormous payload of approx. 1.5 tons at an operating weight of only 3.9 tons. The vehicle width is a narrow 1.70 meters. The advantage of articulated frame steering makes the Terex® TL65 ideal for narrow job sites, such as in gardening and landscape construction. Additional equipment features are a comfort cab with excellent view and two doors, parallel kinematics, Terex fingertip control, oscillating rear axle and automatic self-locking differential.

  • Excellent all-round visibility
  • Steel cab with perfectly designed operator's stand
  • Easy service accessibility for minimized downtime
  • Ergonomically designed controls for fatigue-free operation
  • Self-locking differentials provide optimum traction
  • Loader frame with proven parallel kinematics
  • Fuel-efficient Deutz diesel engine
  • Hydrostatic drive, independent from loader hydraulics.
OPERATING DATA, STANDARD EQUIPMENT
Operating weight (SAE J 1197) 9,040 lbs (4,100 kg)
Tipping load, straight at full reach 6,560 lbs (2,975 kg).
Tipping load, articulated at full reach 5,788 lbs (2,625 kg).
Operating load, fully articulated 2,984 lbs (1,313 kg)
Total length, bucket on ground 15' 8" (4,780 mm)
Total width 5' 7" (1,700 mm)
Turning radius at outside bucket edge 12' 8" (3,870 mm)
Wheelbase 6' 5" (1,950 mm)
Total height (top of cab) 8' 7" (2,610 mm)
ENGINE
Manufacturer, model Deutz, D 2011 L04
Type 4-cylinder diesel engine, EC phase III A, EPA Interim Tier 4
Combustion 4-stroke cycle, direct fuel injection
Displacement 189 in3 (3,100 cm3)
Net power rating at 2300 rpm (SAE J1349) 49 hp (36.4 kW)
Cooling system External oil cooling
ELECTRICAL SYSTEM
Nominal voltage 12 V
Battery 12 V / 74 Ah / 400 A
POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed
ranges. Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear
axle via cardan shaft to front axle. Brake inching pedal.
2 speed ranges:
"Low" 0-4 mph (0-7 kph)
"High" 0-13 mph (0-20 kph)
4 speed ranges (high-speed version optional):
"Low" 0-4 / 0-11 mph (0-6.5 / 0-18 kph)
"High" 0-9 / 0-22 mph (0-14 / 0-36 kph)
Drawbar pull 6,800 lbs (3,002 daN)
AXLES
Front: Planetary drive axle, rigidly mounted. Limited slip-type differential 45%.
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%. Axle weights, 441 lbs (200 kg), standard.
Angle of oscillation ±12°
TIRES
Standard 365/70 R 18 SPT 9 Dunlop
Optional tires available, see options section
BRAKES
Service brake: Hydraulically actuated center-mounted drum brake, acting on all 4
wheels via 4-wheel drive.
Auxiliary brake: Hydrostatic drive provides dynamic braking.
Parking brake: Mechanically actuated center-mounted drum brake on front axle.
STEERING
Articulated, 1 steering cylinders with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
FLUID CAPACITIES
Fuel tank 20 gal (75 l)
Hydraulic system (incl. tank) 16 gal (60 l)
HYDRAULIC SYSTEM
Pump capacity max.11 gpm (41 l/min)
Working pressure 3,625 psi (250 bar)
Control unit: Proportional hydraulic valve with 3 control circuits and high-speed control for tilting.
Simultaneous, independent control of all movements. Single, four-way control lever (multi-function
lever) for tilt and lift cylinder with integrated travel direction selector switch and switch for additional
control circuit. Float position in control circuit "Lowering", electro-hydraulically operated. Additional
control circuit including quick couplers and continuous operation function provided as standard.
LOADER FRAME
Loader installation featuring true parallel linkage and integrated mechanical (optionnally hydraulic)
quick-attach system.
General-purpose bucket (SAE J 742) 0.85 yd3 (0.65 m3)
Lift capacity at ground level (SAE J 732) 7,420 lbf (33,000 N)
Breakout force at bucket edge (SAE J 732) 8,320 lbf (37,000 N)
FORK LIFT ATTACHMENT
Operating load (SAE J 1197) over the total lift and steering range 2,350 lbs (1,066* kg)
Operating load in transport position, above ground level, total steering range 4,190 lbs(1,900* kg)
Width of fork carrier 4' 1" (1,240 mm)
Length fork tines 4" x 1.6" (100 mm x 40 mm) 35" (900 mm)
Stability factor 2
Load center from fork attachment point 22" (560 mm)
CAB
Rubber-mounted full-vision steel cab, ROPS (SAE J 1040) and FOPS** (SAE J 231) certified.
Cab featuring two doors, electric windshield intermittent wipers and washer (front and rear), tinted
panoramic safety glass, sliding window on left-hand side.
Operator’s seat is weight adjustable and includes hydraulic cushioning and lap belt.
Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front
and rear.
Air conditioning and radio pre-installation.
Tilt and height adjustable steering wheel.
2 working fl oodlights, front.
Sound level values in compliance with EC-directives.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)