TL260 for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TL260

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

With the extension option of the lifting arm, the Terex TL260 achieves an enormous lifting heigh of up to 4 meters - perfect for loading silos and large trucks. For low-fatigue transfer work, the driver can change over from the usual steering mode to the versa-steer mode (optional). And thanks to its one hundred percent parallel guidance, the TL260 is best suited for use with a pallet fork. Additional highlights for exceptional operation are the hydrostatic drive, the unique and powerful Terex SP kinematics and the exclusive cooling system with reversing blower.

  • Excellent all-round visibility
  • Steel cab with perfectly designed operator's stand
  • Easy service accessibility for minimized downtime
  • Ergonomically designed controls for fatigue-free operation
  • Self-locking differentials provide optimum traction
  • Loader frame with TSP kinematics
  • Fuel efficient Cummins turbocharged diesel engine
  • Fully automatic VarioPower transmission for smooth acceleration up to 40 kph

 

OPERATING DATA, STANDARD EQUIPMENT
Operating weight (SAE J 1197) 31,745 lbs (14,400 kg)
Tipping load, straight at full reach, direct mounting / QAS 23,633 / 22,840 lbs (10,720 / 10,360 kg)
Tipping load, articulated at full reach, direct mounting / QAS 20,635 / 19,930 lbs (9,360 / 9,040 kg)
Operating Load, fully articulated 10,584 lbs (4,800 kg)
Total length, bucket on ground 23' 9" (7,230 mm)
Total width 8' 2" (2,500 mm)
Turning radius at outside bucket edge 20' 2" (6,150 mm)
Wheelbase 10' 2" (3,100 mm)
Total height (top of cab) 10' 8" (3,260 mm)
ENGINE
Manufacturer, model Cummins, QSB 6.7
Type 6-cylinder turbocharged diesel engine, COM III/EPA III
Combustion 4-stroke cycle, Common Rail injection
Displacement 409 in3 (6,700 cm3)
Net power rating at 2,200 rpm (SAE J 1349) 172 hp (128 kW)
Cooling system Water
ELECTRICAL SYSTEM
Nominal voltage 24 V
Battery 2 x 12 V / 110 Ah / 850 A
POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics,
automatic adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed
ranges. Infi nitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear
axle via cardan shaft to front axle. Brake inching pedal.
2 gears:
“Low” 0-3.7 mph (0-6 kph)
“High” 0-25 mph (0-40 kph)
Drawbar pull 24,750 lbs (11,000 daN)
AXLES
Front: Rigid planetary fi nal drive axle. Limited slip-type differential 45%..
Rear: Oscillating (with cushioning) planetary fi nal drive axle, with integrated reduction gear. Limited
slip-type differential 45%.
Angle of oscillation ±12°
TIRES
Standard 20.5 R25 VJT Bridgestone
BRAKES
Service brake: Hydraulically actuated two-circuit power brake system. Oil-immersed
multi-disc brakes in both axles, acting on all 4 wheels
via 4-wheel drive.
Auxiliary brake: Hydrostatic drive provides dynamic braking.
Parking brake: Spring-loaded brake acting on the discs of the rear axle
STEERING
Articulated, 2 steering cylinders with fi nal positioning damping on both sides, fully hydraulic through
Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
FLUID CAPACITIES
Fuel tank 63 gal (240 l)
Hydraulic system (incl. tank) 35.6 gal (135 l)
HYDRAULIC SYSTEM
Max. pump capacity 42.3 gpm (160 l/min)
Max. working pressure 4,500 psi (310 bar)
Control unit: Proportional hydraulic valve with 3 control circuits. Simultaneous, independent control of
all movements. Single, four-way control lever (multi-function lever) for 1 tilt and 2 lift cylinders with
integrated travel direction selector switch and switch for additional control circuit. Float position in
control circuit “Lowering”, electro-hydraulically operated. Additional control circuit electrically operated
with pre selection of fl ow rate and impulse/continous operation.
LOADER FRAME
Loader frame with TSP-linkage, attachments directly mounted.
General-purpose bucket (SAE J 742) 3.4 yd3 (2.60 m3)
Lift capacity at ground level (SAE J 732) 31,698 lbf (141,000 N)
Breakout force at bucket edge (SAE J 732) 26,955 lbf (119,900 N)
FORK LIFT ATTACHMENT
Operating load (SAE J 1197), over the total lift and steering range 8,820 lbs (4,000 kg)
Operating load in transport position, above ground level, total steering range 11,023 lbs (5,000 kg)
Width of fork carrier 6' 3" (1,900 mm)
Length pallet forks 5.9" x 2.4" (150 mm x 60 mm) 3' 8" (1,200 mm)
Stability factor on level and solid ground 2
Load center from fork attachment point 22" (560 mm)
CAB
Rubber-mounted full-vision steel cab, ROPS (SAE J 1040) and FOPS (SAE J 231) certified.
Cab features two doors, level entry to cab and easy-to-clean floor.
Electric windshield intermittent wipers and washer (front and rear), tinted panoramic safety glass,
sliding window on left-hand side.
Operator’s seat MSG85 (standard version) with hydraulic cushioning and lap belt, weight-adjustable, in
compliance with ISO 7096 and ISO 6683.
Cab heating with 3-setting heater fan (choice fresh air/recirculating air) and windshield defroster
(front and rear).
Automatic climate control.
Steering wheel with height and tilt adjustment.
2 front and 2 rear working fl oodlights.
Sound level values in compliance with EC-directives.