TC35 for sale at Free Shipping on Parts at Hlavinka's. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.
View Other Models:
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
The Terex® TC35 compact crawler excavator offers operators smooth, simultaneous operation with axial piston, variable displacement hydraulic pumps and motors that provide load-sensing and load independent flow division (LUDV) hydraulics. An auxiliary hydraulic circuit with open (pressureless) return provides flexibility in adding attachments. It comes standard with pin-on buckets and J.I.C. hydraulic hose fittings. The offset boom design with built-in swing gives operators excellent visibility as well as the ability for multi-width excavation and parallel-to-wall operation.
The TC35 compact excavator offers an enhanced design for greater digging performance. For example, this unit is equipped with a larger, longer counterweight provides increased balance and lift capacity. With its offset boom design and Knickmatik® boom solution, operators can perform tasks with this unit within the most confined construction sites. The Knickmatik cylinder is purposely positioned to protect against damage from collisions. The offset boom can move to either side at full digging depth. This feature allows TC35 operators to work alongside walls, existing infrastructure, hedges or embankments. The total articulation of the Knickmatik solution is 120 degrees.
- Monobloc boom, with extended dipperstick 1,800 mm (5'11")
CRAWLER CHAIN OPTIONS
- Steel crawler tracks, 300mm (12") wide
- Terex 'Fingertip' control (electro proportional) for additional control circuit for work attachments on right joystick, actuation via rollers
- Terex 'Fingertip' control (electro proportional) incl. second additional control circuit on left joystick, actuation via rollers
- Hose-rupture / load-retaining valve for boom with load warning device
- Second additional control circuit (e.g. for sorting grab), foot pedal
- Hose-rupture / load-retaining valve for dipperstick
- Biodegradable hydraulic oil / ester-based HLP 68 (Panolin)
- Float position - front dozer blade
- Fabric-covered operator's seat MSG 20 (standard version), lap belt, adjustable driver's weight
- Operator’s seat MSG 85 (premium version), hydraulic damping, extra-high backrest, tilt-adjustable armrests longitudinal-horizontal suspension, mechanical lumbar support
- Operator's seat MSG 95 (premium version), air damping, extra-high backrest and tilt-adjustable armrests, longitudinal-horizontal suspension, seat and backrest heating, pneumatic lumbar support
- Canopy with working floodlight
|Manufacturer, model Mitsubishi, S4L2|
|Type 4-cylinder diesel engine, EPA/Tier 4 Interim (2008)|
|Combustion 4-stroke, swirl chamber injection|
|Displacement 1758 cm3|
|Net power rating at 2200 rpm (ISO 9249) 22 kW (30 hp)|
|Torque 105 Nm at 1800 rpm|
|Cooling system Water|
|Nominal voltage 12 V|
|Battery 12 V / 71 Ah|
|Generator 12 V / 50 A|
|Starter 12 V / 2.0 kW|
|Two-stage hydrostatic travel drive with axial piston variable displacement motor and reduction gear, fully
enclosed. “Straight-Travel” function. Brake valve for downhill drive.
|2 speed ranges:|
|Travel speed, forward and reverse 0-2.7 / 4.6 kph|
|Gradeability max. 60 %|
|Drawbar pull 1st / 2nd speed range 3100 / 1600 daN|
|Maintenance-free crawler-type undercarriage. Idler suspension with hydraulic crawler track tensioning.|
|Width rubber crawlers / steel crawlers 300 mm|
|Tread width 1200 mm|
|Total length (sprocket - idler) 1555 mm|
|Total length (undercarriage) 1996 mm|
|Independent of drive train, sensitive control via separate hand lever.|
|Width x height (“standard” / “extra-long”) 1510 x 360 mm|
|Dozer cut below ground 320 / 298 mm|
|Dozer cut above ground 202 / 447 mm|
|Slope angle 22° / 31°|
|Slope balance 9.7° / 7.7°|
|Independent, individual control of crawler chains, also counterwise. Sensitive control via hand levers
combined with foot pedals. Pedal console serving as foot rest.
|Hydrostatic drive, also acts as wear-resistant brake. Additional spring-loaded multi-disc brake. Internally
toothed ring gear.
|Swing speed 0-10.5 rpm|
|Lateral parallel adjustment of boom arrangement at full dig depth.|
|Angle of articulation / lateral adjustment left 60° / 445 mm|
|Angle of articulation / lateral adjustment right 60° / 595 mm|
|Fuel tank 52 l|
|Hydraulic system (incl. tank 71 l) 85 l|
|OPERATING DATA, STANDARD EQUIPMENT|
|Transport weight (incl. bucket) 3500 kg|
|Operating weight acc. to ISO 6016 (incl. operator) 3575 kg|
|Total length (travel position) 3285 mm|
|Total length (trailer transport position) 5150 mm|
|Total height (travel position) 3500 mm|
|Total width 1500 mm|
|Uppercarriage tailswing 1350 mm|
|Uppercarriage frontswing 1600 mm|
|Working envelope 180° / 360° 2970 / 3200 mm|
|Ground clearance 300 mm|
|Bucket digging force (ISO 6015) 24,600 N|
|Stick digging force (ISO 6015) 16,200 (14,900*) N|
|Ground pressure (rubber crawlers) 0.31 daN/cm2|
|Pump capacity max. 95 l/min|
|Working pressure 250 bar|
|Working hydraulics: LS-axial-piston variable displacement pump, load sensing and load-independent
fl ow distribution (LUDV) for all work functions and travel drive. Simultaneous independent control of all
|Tank-immersed return fi lter with electric contamination indicator, full fl ow fi ltration. Hydraulic oil radiator
provided as standard. Boom, dipperstick and articulated cylinders with end-positioning damping on both
sides, bucket retract function with one-side end-position damping.
|Control circuit for work attachments (standard):
Diagram shows P/Q provided on couplers
|Spacious, sound-insulated full-vision steel cab, FOPS** (acc. to ISO 3449) and TOPS (acc. to ISO 12117)
certifi ed. Two equally large doors. Safety glass windows, thermo windows tinted in green. Skylight thermo
window, bronze tinted. Panoramic rear window. Front window supported by pneumatic springs, lockable
for ventilation and slidable under cab roof. Windshield washer system. Storage compartment. Preparation
for radio installation. Left-hand outside rear-view mirror.
|Cab heating with windshield defroster through coolant heat exchanger and 2-speed fan, ventilating mode
|Operator's seat MSG 85 (standard version), hydraulic damping, short backrest, height-adjustable,
longitudinal-horizontal suspension, lap belt.
|Instrument panel on the right hand side of the operator's seat with visual & acoustic warning device,
hour-meter, instrument cluster with large fuel gauge.
|Working fl ood lights Halogen H-3.|
|Noise emission ambience LWA 95 dB (A)|
|Noise emission cab LpA 76 dB (A)|
|Measured in dynamic measuring cycle acc. to EC-directive 2000/14/EC.|
|*with dipperstick 1800 mm (optional)
**FOPS-approved only with skylight guard (optional)