TC15 for sale at Free Shipping on Parts at Hlavinka's. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model TC15

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Driver’s stand that meets your requirements

As well as the standard driver’s stand, Terex mini crawler excavators can also be fitted with a comfortable cab.

Flexible boom system for substantial reach

The standard reach and digging depth can be adapted to other possible applications using a longer dipperstick, which is available as an option.

Maximum unloading height with cab:

  • Standard arm: 2350 mm
  • Extended arm: 2420 mm

Maximum digging depth:

  • Standard arm: 2070 mm
  • Extended arm: 2170 mm

Well Equipped – Standard Equipment

  • Rubber tracks
  • Dozer blade
  • Dual speed
  • Dipperstick length of 950 mm
  • Dry air filter with pollution indicator
  • Tool kit for maintenance work
  • Working floodlights on the boom
  • Protective devices on the lifting cylinder and blade
  • Hydraulic system for hammer and swing bucket
  • Economical, low-exhaust engine, complies with emission requirements
  • Hydraulic hoses routed inside for better protection
  • Auxiliary hydraulic circuit for work attachments, single and double acting (for hydraulic breaker or swing bucket), inclusive open return line

Driver’s stand

Canopy with TOPS (Tip Over Protective Structure) and optional FOPS (Falling Objects Protective Structure) certification Safety belt.

ELECTRICAL SYSTEM
Operating voltage 12 V
Battery 12 V / 65 Ah
Generator 12 V / 35 A
TRANSMISSION
Two-stage hydrostatic travel drive with axial piston variable displacement motor and reduction gear, fully
enclosed.
Travel speed, forward and reverse 0-2.2/4.2 kph
Gradeability max. 60%
Drawbar pull 1470 daN
ENGINE
Manufacturer, model Yanmar, 3TNV70-NPR
Type 3-cylinder diesel engine, EPA/Tier 4 Final (2008)
Combustion 4-stroke, swirl chamber injection
Displacement 854 cm3
Power rating acc. to ISO 9249 at 2260 rpm 11.2 kW (15 HP)
Consumption 2.5 l/h
Cooling system Water
DOZER BLADE
Independent of drive train, sensitive control via separate hand lever. Cylinder protection as standard.
Width x height 990 x 240 mm
Dozer cut below ground 290 mm
Dozer lift above ground 260 mm
Slope angle 30°
STEERING
Independent, individual control of crawler chains, also counterwise. Sensitive control via hand levers
combined with foot pedals. Pedal console serving as foot rest.
FLUID CAPACITIES
Hydraulic system (incl. 20 l tank) 30 l
Cooling system 4 l
Engine oil 2.8 l
HYDRAULIC SYSTEM
Pump capacity 17.6 + 17.6 +14.3 lpm
Working pressure 210 bar
Working hydraulics: Tandem-controlled dual piston variable displacement pump for all work movements
and travel drive. Simultaneous independent control of all movements.
Control circuit for work attachments (single or dual-action):
Pump capacity 36 lpm
Max. working pressure 210 bar
OPERATOR’S CANOPY
Robust steel pipe construction with 4 vertical support members and steel plate protection roof.
FOPS (acc. to ISO 3449) and TOPS (acc. to ISO 12117 / EN 13531) certifi ed.
Operator's seat with artifi cial leather covering, seat belt.
Instrument panel on the right hand side of the operator's seat with visual & acoustic warning device,
hour-meter, instrument cluster with large fuel gauge.
Working fl oodlights mounted on the boom.
Noise emission ambience LWA 93 dB (A)
Noise emission cab LpA 79 dB (A)
Measured in dynamic measuring cycle acc. to EC Directive 2000/14/EC.
*with 1100 mm dipperstick (optional)
OPERATING DATA, STANDARD EQUIPMENT
Transport weight (with canopy) 1550 kg
Transport weight (with cab) 1650 kg
Operating weight (with canopy) acc. to ISO 6016 1679 kg
Operating weight (with cab) acc. to ISO 6016 1794 kg
Total length (travel position) 2371 (2401*) mm
Total length (trailer transport position) 3600 mm
Total height (travel position) 2357 mm
Total width 990 mm
Uppercarriage tailswing 650 mm
Uppercarriage frontswing 1640 (1670*) mm
Working envelope 180° / 360° 2290 / 3280 (3340*) mm
Ground clearance 190 mm
Bucket digging force (ISO 6015) 15,200 N
Stick digging force (ISO 6015) 11,730 N
Ground pressure (rubber crawlers) 0.27 daN/cm2
UNDERCARRIAGE
Maintenance-free crawler-type undercarriage. Idler suspension with hydraulic crawler track tensioning.
Width (outside edge of crawler chains) 990 mm
Width of rubber crawlers 230 mm
Total length (sprocket - idler) 1078 mm
Total length (undercarriage) 1462 mm
SWING SYSTEM
Hydrostatic drive, also acts as wear-resistant brake. Internally toothed ring gear.
Swing speed 0-12 rpm
KNICKMATIK®
Lateral parallel adjustment of boom arrangement at full dig depth.
Angle of articulation / lateral adjustment left 61° / 470 mm
Angle of articulation / lateral adjustment right 69° / 570 mm