CM209 Mergers for sale at Free Shipping on Parts at Hlavinka's. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model CM209 Mergers

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.


Three Available Models

Case IH CM Series crop mergers offer three models in center-pull, fixed-tongue/side-pull or hydraulic swing-tongue configurations.

Fixed-Tongue Model

For smaller operations, the economical, hydraulically driven center-pull CM109 crop merger has a merging capability of 9 ft.–12 ft. (2.7 m–3.66 m).

  • Optional 2-ft. (0.6-m) extension can be added to merge a 14-ft. (4.3-m) cut area
  • Can be operated with a 70-hp (52-kW) tractor using one remote
  • Standard hitch for transport

Hydraulic Swing-Tongue Models

The 9-ft. (2.7 m) CM209 and 12-ft. (3.66 m) CM212 models feature a side-pull, hydraulic swing-tongue design and can merge up to 12 ft. (3.66 m).

  • Extensions can be added to expand the merge area up to 18 ft. (5.5 m)
  • The hydraulic swing tongue allows the tractor to operate to the left side of the windrow or swath being picked up
  • The tractor-mounted electric control box manipulates the tongue swing and pickup raising and lowering
  • Can be operated with a 70-hp (52-kW) tractor equipped with two remotes, with one having at least 16 gpm flow at 2000 psi hydraulic pressure
    • For those without adequate hydraulic flow on the tractor, an optional, self-contained hydraulic pump drive kit with a PTO pump can be installed
  • The roller windguard mounted forward of the pickup pre-compresses crop as it engages the pickup teeth


Case IH CM crop merger models use a floating pickup that features replaceable, three-prong teeth to deliver crop evenly to an extra-wide, 42-in. (107-cm)-wide ribbed cross conveyor

  • The belt delivers crop to the right side for merging and easily accommodates a massive flow of material 
  • Pickup and conveyor speed adjust simultaneously for smooth crop flow
  • The high rear conveyor panel prevents overflow and spillage
  • The anti-wrap system on the conveyor bearings prevents crop from wrapping and damaging bearing seals
  • Compared to raking, the crop merger lifts crop onto a belt so the crop is never dragged along the ground
    • Leaf loss is reduced, and less stones and soil end up in the crop


switch direction of the merging crop

  • Easily switch direction of the merging crop from the right to the left using the optional inverter chute 
    and switching two quick-connect hydraulic hoses
  • Two standard gauge wheels can be adjusted to field or crop height by simply removing and reinstalling two pins


9 (2.7) Center-Pull, Fixed-Tongue
9 (2.7) Side-Pull, Hydraulic Swing Tongue
12 (3.66) Side-Pull, Hydraulic Swing Tongue