LB334 Standard for sale at Hlavinka Equipment Co, Texas. Serving your new and used equipment needs from East Bernard, El Campo, Victoria, Rosenberg, Nome, Bay City, and Taft, TX.

Model LB334 Standard

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

DESIGN WITH PURPOSE

The LB4 series large square baler isn’t just another pretty piece of equipment: it is designed from the ground up for long life and superior performance. On the outside, the unique curved shape allows it to shed crop debris. The baler width has been reduced by 2 feet to improve visibility to the rear and sides of the baler and takes up less space on the road and in the shed. Composite side panels are lighter, rust proof and fade resistant. And underneath that curvy red exterior is an amazing workhorse that has more capacity than its forerunners.

Servicability

  • Three stage opening assembly
    • Easy ground level access to key service points
    • Full visibility of gearbox for routine checks
  • Ground level flywheel brake lever has to be in place before you can raise the shield
  • New styling includes a newly designed service platform
    • Which features one level for easy access to key bale chamber service points and knotters
  • The foldable ladder provides quick access to the platform and stores easily without being an obstacle.

Operator Visability

  • Narrow sleek design of the LB4 series balers
    • Increases operator visibility to the rear and sides of the baler for increased operator efficiency
  • Curved shape allows for crop debris to fall off baler for less ingress of debris into knotter assembly and twine storage areas
    • Resulting in less operator maintenance and increased performance

one piece design

  • One piece twine box panels utilize durable thermoform technology
  • Composite shields
    • A one piece design with automotive seals for minimal debris in twine box.
    • Providing easy maintenance and less ingress of debris into twine and knotters
  • Front gearbox shield
    • A composite shield using rotomold technology for lighter weight and durability.
  • Roller Chute
    • Choose from either a Single Piece Roller Chute or Two Piece Roller Chute (two-piece shown)

Drive Option

  • Same proven design
  • Upgraded primary and secondary drivelines
  • Offering increased capacity
  • Three-joint design
    • Angle input shaft reinforced reducing vibrations
    • Resulting in better reliability and longer life

Higher Efficiency Flywheel

  • Larger diameter high-inertia flywheel
    • Results: 48% more energy
    • Smoother operation
    • Increased fuel efficiency
  • Heavier duty components inside the gearbox
    • Providing durability and an increased strokes per minute from 42 to 48
    • Giving 20% more capacity

Versatility

  • Larger tire options
    • Prividing improved flotation and a lighter footprint
  • Choice of three axle configurations
    • 1. Single
    • 2. Steered Tandem
    • 3. Large Steered Tandem

PICK UP

Capacity & Reliability

  • Pick up designed for capacity and reliability
  • The wide pick ups and the new pick up flares ensure crop isn’t left behind
  • The roller windguard provides an even flow of crop material into the baler
    • The roller windguard is adjustable up and down with out the use of any tools
  • The Feed assist roller directs crop material directly into the pre-chamber of the baler optimizing crop flow
    • The feed assist roller works in conjuction with the overshot stub augers to consistently move material from the sides of the pick up into the pre-chamber.

Durability & wear life

  • The pick up has been re-designed for increased durability and wear life
  • Strengthened frame and pick up reel  to handle tough conditions
  • Coil mounted tines are shot peened to stand up to adverse conditions with out bending or breaking
  • Overall the combination of the roller windguard, feed assist roller and overshot augers provide optimum feeding and result in high capacity feeding

Precutting Systems

  • Used for high-density bales that break apart easily for feeding
    • Select from two optional Case IH precutting systems 
  • Crops are cut before it enters the precompression chamber
    • Packing more crop into each bale, saving on handling and transportation costs
  • Case IH precutting systems create:
    • Bales of greater weight and density
    • Superior feed quality
    • Reduced mixing time
  • TMR feed wagons Rotor Cutter System offers maximum flexibility and bale density
  • Add the optional Case IH rotor cutter to your LB4 Series baler
    • It uses a large rotor to feed crop from the pickup through a row of knives before entering the precompression area.
  • Knives give the desired length of cut
    • Put all knives in place; get the shortest cut: 1.53 in. (39 mm)
    • Knives are controlled hydraulically from the tractor seat
    • Easily inspect, sharpen or change rotor cutter knives with a convenient slide-out knife drawer
    • Knives are spring loaded to protect them from damage

BALE CHAMBER AND KNOTTER SYSTEM

Match your baler to your tractor and then match your bales to your feed, shipping and storage needs. Case IH LB4 series large square balers form bales that stack perfectly and are denser, thanks to things like left and right steering sensors that you can observe through your AFS Pro 700 display and quickly and easily adjust for perfect bale formation. In addition, a removable floor liner adjusts to different crop types. Adjust to your specifications, whether you’re baling for your own livestock or running a commercial hay operation.

Matched Systems

  • New suspended roller wind guard
    • Feed-assist roller to efficiently move your crop into the pre-chamber
  • Pickup is matched to the width of the bale chamber
    • Cutter and pre-compression chamber widths match also
  • Results: better capacity, more efficiency and, ultimately, better bale quality
  • New heavy duty pickup reel handles varied crop types including corn stalks and other tough stubble.

The Perfect Finish

  • Reduce the risk of twine breakage with drive shaft-driven double knotters
  • Increase daily output of dense bales that can stand up to rough handling
  • Our best-in-class double knotters have new improved shielding
    • Repositioned fans to keep them clean
    • Providing protection and efficient operations
  • Two separate spools feed twine directly to the top and bottom of the bale
    • Reaching the preset bale length engages the knotter system
  • Twine moves around the bale as it is formed
    • Eliminating stress on knotter components
    • Providing greater reliability to the system and tying cycles
  • Dual bale chamber ejector tines offer complete bale clearance
    • Works independently to remove the rearmost bale

Extras that help you go the extra mile

  • Twine storage with 16 balls on each side
    • The easy-thread system allows you to keep baling when the conditions are right.
  • Case IH ThirtyPlus liquid preservative
  • Bales at a higher moisture content without worrying about heating or mold damage resulting in higher-feed-value bales
  • For maximum flexibility and bale density, add an optional Case IH rotor cutter
  • This system uses a large rotor to feed crop from the pickup through a row of spring-protected knives before entering the compression chamber.

Lighting Package. Don't let the lack of daylight stop your productivity

  • Newly designed oval lights
    • Repositioned for greater visibility and come standard on all models
    • Lights can be controlled from the comfort of your cab through the monitor soft key
  • An optional service light package is available to provide optimal brightness for working at night

MONITORS AND SYSTEMS

As with most Case IH equipment, the LB4 series baler comes with AFS capability built right in. The same intuitive, easy-to-read displays used to control and monitor Case IH tractors, combines, sprayers and planters control key functions and track important information on LB4 balers. Monitor bale weight and moisture, and detect miss-ties with your AFS Pro 700 display. A camera feed can be used to keep an eye on bales as they are ejected from the chute. In addition, Case IH AFS Pro displays can be used for GPS data logging. 

AFS PRO 700

  • The AFS Pro 700 was designed for agricultural applications
  • Lighter and thinner with more computing power – without sacrificing its 10-inch, easy-to-read touchscreen  
  • The Pro 700 display delivers all-light readability on one of the largest screens in the industry
    • A lighter, thinner package with more computing power than its predecessor
  •  The LB4 balers offer the ability to log GPS data onto a USB drive
    • So you can download
    • Analyze and map detailed field and bale information using desktop software

AFS PRO 300

  • The AFS Pro 300 was designed to interface seamlessly with a variety of compatible equipment
    • The display that is 7-inches
    • Full-color display  
  • It includes track baler-specific operations such as:
    • Bale weight
    • Moisture monitoring
    • Bale density

Rear-View Display

  • A view from a rear-mounted camera also feeds into the display so you can see each bale eject
    • Rigid camera mounting assembly that is fixed on the rear handrail
    • The camera is high quality and provides one view from the rear
    • AFS Pro 700 only

SERVICE

 Case IH balers are designed to give you continuous performance, no matter the crop or condition. We build our balers so that service and maintenance are simple, and that everything is easily accessible. When you choose one of our balers, you’ll benefit from less time in the shop and more time in the field.

Automated Maintenance

  • Automatic greasing system
    • Pumps grease from the reservoir to five grease divider blocks that lubricate individual grease points
    • Saves time
    • Improves bearing life

Continuous Lubrication

  • Standard automatic central lubrication distribution system 
  • Provides a constant regulated oil supply to the drive chains for smooth operation and decreased maintenance time.

Total Accessibility

  • Ground-level access to key service points
  • Including a convenient slide-out knife drawer for inspecting, sharpening or changing out knives quickly and easily
  • A newly designed service platform gives you easy access to key bale chamber service points and knotters from a single level
  •  A foldable ladder provides easy access to the top of the baler when you need it and stays out of the way when you don’t

 

Make Case IH
Model LB334 Standard
Bale Size  
Bale width, in (mm) 31.5 (800)
Bale height, in (mm) 35.4 (900)
Bale length, maximum, in (mm) 102.4 (2600)
Pickup  
Pickup working width, in (mm) 77.5 (1968)
Outer tine-to-tine width, in (mm) 70.2 (1782)
Number of tines 56 double (112)
Tine spacing, in (mm) 2.6 (66)
Number of tine bars or tine rows 4
Gauge wheel size Two 15x6.00-6 4PR
Cutter System  
Cutter knives None
Feeder  
Feeder Description 2 packer forks, 6 single tines
Stuffer Description Fork, 4 tines
Plunger  
Plunger speed, Strokes/minute 48
Plunger stroke, in (mm) 28 (710)
Main Drive  
Drive protection Shearbolt, overrunning clutch & slip clutch
Knotters  
Knotter Type Double knot
Number of knotters 4
Twine ball storage, quantity 32
Density Control  
Density Control 3-way monitor control
Tires  
Tire size, Single axle 600/55x22.5, 12 ply
Tire size, Tandem Axle 500/50x17, 14 ply
Baler Dimensions  
Length w/bale chute extended, in (mm) np
Length w/bale chute folded, in (mm) 294.4 (7477)
Baler width, in (mm) 101.1 (2568)
Height, single axle, in (mm) 123.3 (3133)
Height, tandem axle, in (mm) 123.3 (3133)
Weight, empty, w/bale ejector & chute
Weight, single axle, lbs (kg) np
Weight, tandem axle, lbs (kg) np
Tractor Requirement  
Tractor Power, hp (kW) 105 (78)
PTO Speed, rpm 1000
Number of remote hydraulic valves 2
Sales Literature  
Literature number HF-5138-12
Literature date 07/01/2012
Manual  
Manual Number --
Manual Date --
Entry Date  
Manufacturing Status Current
Entry Date 08/01/2012
Revision Date --
na = Not Applicable, np = Not Published